We recommend that you remove hose from vehicle to take accurate measurements.
Step 1
![]() |
![]() |
Lay hose flat (as much as possible) and measure alonf centreline to get an exact dimension. If fittings cause confusion, measure hose to under swage collar, then measure each fitting to hole from swage collar & add up. |
Step 2
After length measurements are made, identify end fitting types in relation to master cylinder/pressure input & caliper/pressure output.
Click here to go to Fitting types to see fitting types.
Step 3
After fitting type identifications are made, identify end fitting bends in relation to master cylinder/pressure input & caliper/pressure output.
Click here to go to Fitting types to see fitting bends.
Step 4
With fittings identified, measure fitting's angular displacement in relation to each other (Master to Salve accordingly).
Click here for guide to fitting angular displacement.
Step 5
Finally, specify if there are any locators, straight sleeve, or hose grommets/accessories to be included before you submit your order to us.
Click here to view our range of brake fitment accessories & hardware.
Step 6
Add banjo bolts if required, identify or let us know what brand of brake component, ie, master cylinder/caliper to obtain relevant fit banjo bolt.
Click here to view our range of banjo bolts & hardware.
And you are done!
: )